GEN 2 - Can Control module

Technical Specifications

• 1 Processor Microchip 18F46K80

• 1 RS485 bus connection (A and B line) – 600 meters maximum bus length

• 1 CAN bus connection - 100 meters maximum bus length

• 1 Jumper for RS485 bus termination

• Program Connector

• RS232 Connector for DALI connectivity

• 12V Controlled output for connected micro CAN modules

• 5 Green connection status LEDs

• 1 Orange status LED

• 1 Green power LED

• 1 Network registering button

• Automatic network address generation

• 12VDC Power supply, reverse polarity protected

• 25mA current consumption for the modules itself + load of the micro CAN modules

• DIN rail mountable, takes up 3T

• Dimensions: 5.8cm × 5.3cm × 9cm

• Used in conjunction with a Master module and micro CAN modules

• Programming language firmware: Pic Basic Pro

• Bootloader: Yes

Help

• How do I program a module?

• Documentation

Hardware

This module consists of the following PCBs (Printed Circuit Boards):

OMHCR

The main PCB that houses all module specific components

OMHT3

Generic top panel PCB with all front panel interface components